Removing The Grease Filters; Replacing The Carbon Filter; Lighting - ETNA AP290RVS Bedienungsanleitung

MAINTENANCE
Grease filters
Carbon filter

Lighting

L
P
EN 8
Removing the grease filter
Switch off the electricity! Remove the plug from the socket or switch
the electricity off at the mains. Pull the grease filter towards you and tilt
it downwards at the front.

Replacing the carbon filter

The carbon filter must always be used if the cooker hood is not ducted.
• Remove the grease filter.
• Attach the carbon filters to the motor.
• Replace the grease filter.
Note!
• Saturation of the activated charcoal will eventually occur after
prolonged use, depending on the type of cooking and how
frequently the grease filter is cleaned.
• The carbon filter needs to be replaced at least every four months.
• The carbon filter cannot be washed for reuse. Saturated carbon is
not environmentally friendly. Change the filter regularly.
Please note! Disconnect the appliance from the mains by removing
the plug from the socket before the changing the light.
1. Remove the grease filters
2. Replace the lamp with a new lamp of the same type.
3. Replace the grease filters.
Lamp Power (W)
3
M
Socket Voltage Dimension
(V) (mm)
E14 220-240 102 x 35
ILCOS Code
DRBB/C-3-220-240
E14-35/102