CLEANING
Cleaning the appliance
Cleaning function
EN 32
Clean your appliance regularly to prevent a build up of grease and
food particles, especially on interior and exterior surfaces, the door
and door gasket.
• Switch on the child lock (to prevent the appliance starting to
operate unexpectedly).
• Clean the exterior surfaces with a soft cloth and soapy warm water.
• Wipe afterwards with a clean, damp cloth and dry the surfaces.
• Remove splashes and stains on the interior surfaces with a soapy
cloth.
• Wipe afterwards with a clean, damp cloth and dry the surfaces.
• Take care that no water enters the vents.
• Never use abrasive cleaning materials or chemical solvents.
• Ensure that the door gasket is always clean. This will prevent
a build up of dirt so that the door can close properly.
Grease and grime can easily be removed from the oven walls with
a damp cloth using the Cleaning function.
Using the cleaning function
Only use the cleaning program when the appliance is cold. It will be
more difficult to remove grime and grease if you use the program while
the appliance is hot.
1. Remove all accessories from the appliance.
2. Pour 150 ml of water into the bottom of the oven.
3. Set the 'Multi-function selector' to 'Cleaning' and start the program.
The program takes 4 minutes.
4. Then wait ± 30 minutes. After 30 minutes, food residues on the
enamel walls will have softened and they will be easy to clean with
a damp cloth.
Attention: Only use the Cleaning function when the appliance has
cooled completely.