Error Codes - ETNA VW247ZIL Bedienungsanleitung

ERRORS

Error codes

Problem
F5
F3
F2
F8
F1
FE
F7
F9
F6
EN 24
Potential causes
Water supply insufficient / blocked
Water supply is not interrupted
Machine does not pump out
Heating error
Flooding alarm
Error in the electronics
Temperature in the machine is too high
Error in the electronics
Error in the electronics
Solution
- Open the supply faucet
- Close the water faucet and please contact
the service department
- Check the drainage hose; it is possibly
clogged
- Check if the filters/sieves are not clogged
- Reset the dishwasher
- Please contact the service department if the
problem persists
- Please contact the service department
- Close the water faucet, switch off the device
and please contact the service department
- Please contact the service department
- Please contact the service department
- Please contact the service department
- Please contact the service department