Zipper Maschinen ZI-HS12TN Betriebsanleitung Seite 28

14 ASSEMBLY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-HS10TN / ZI-HS12TN / ZI-HS14TN
A. Mounting the wheel axle and wheels: Slide
the wheel axle into the two holes on the frame
and attach the wheels to it. Secure the wheels
with a cotter pin and attach wheel caps.
B. Expanding the wedge ram: Remove the R-pins
(1). Keeping the support stand against the
wedge, lower both control handles to expand
wedge ram (2). Insert the R-pins to secure the
cylinder to the splitter (3). Secure the R pins with
the cotter pin into the spring tabs (4).
For this process, it is necessary to have
the log splitter ready for operation.
Hydraulic oil filled, motor connected to
main supply.
C. Removing the
control handles to retract the wedge ram. Remove
the support stand.
N O T I C E
support stand: Release
ASSEMBLY
both
28