General Power Tool Safety Warnings - Makita DFT082R Betriebsanleitung

ENGLISH
(Original instructions)
1 Red part
2 Button
3 Battery cartridge
4 Indicator lamps
5 Check button
6 Switch trigger
7 Reversing switch lever
SPECIFICATIONS
Fastening torque
No load speed (min
Dimensions (L x W x H)
(with BL1430 battery)
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest
combination, according to EPTA-Procedure 01/2014, are shown in the table.
Transmitter
Frequency band
Maximum radio-frequency power
• Intended use: Transmitting various data regarding the fastening operation from the tool and saving them in a PC via
the receiver.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of resi-
dence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Intended use
The tool is intended for screw driving in wood, metal and
plastic.

General Power Tool Safety Warnings

WARNING Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
4
Explanation of general view
8 Lamp
9 LED#A
10 LED#B1
11 LED#B2
12 Adjust grip
13 Ring
14 Adjust ring
Model
Hard joint
Soft joint
–1
)
Net weight
BL1415N / BL1415NA / BL1430 / BL1430B / BL1440 / BL1450 / BL1460A / BL1460B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF
DFT041R
1 – 4 N•m
1 – 4 N•m
800
2,402 – 2,480 MHz
6.49 dBm (EIRP)
Save all warnings and instructions for future
ENE033-1
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
GEA010-2
CORDLESS SCREWDRIVER SAFETY
WARNINGS
1. Hold the power tool by insulated gripping sur-
faces, when performing an operation where the
fastener may contact hidden wiring. Fasteners
contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the oper-
ator an electric shock.
15 Scale
16 Hole for adjust grip
17 Yellow line
18 Compression spring
19 Bit
20 Sleeve
DFT082R
4 – 8 N•m
4 – 8 N•m
860
191 mm x 72 mm x 266 mm
1.3 – 1.7 kg
D.C. 14.4 V
DFT124R
6 – 12 N•m
6 – 12 N•m
600
GEB139-1