Panasonic AW-E750 Handbuch Seite 19

CONNECTION OF A REMOTE CONTROL UNIT (RCU)
Connection to the RCU (WV-RC700A, WV-RC550) is
made through the optional RCU cable AW-CA50A26.
1. Turn RCU power off before connecting cables.
2. Set the cable selection switch of the RCU to MULTI
(in case of using the WV-RC700A)
3. Connect the 50-pin connector of the RCU cable to
the I/F REMOTE Connector of the camera.
4. Turn RCU power on and the power indicator lamp
will light. The camera can now be remote controlled
by the RCU.
Notes:
• The maximum extension distance between the cam-
era and WV-RC700A is 300 m. The maximum exten-
sion distance between the camera and WV-RC550
is 100 m.
• Use the following options for cable extension.
Studio Cable
Cable Joint Adaptor
RCU Cable
AW-CA50A26 (15 m)
-18 (E)-
WV-CA26U15 (15 m/50 ft)
WV-CA26U30 (30 m/100 ft)
WV-CA26U100 (100 m/330 ft)
WV-CA26T26
WV-RC700A
Set to MULTI