Belkin N Wireless ExpressCard Adapter Bedienungsanleitung Seite 26

Using the Belkin Wireless Networking Utility
Changing the Wireless Security Settings
Your Belkin N Wireless ExpressCard Adapter supports advanced security
technology, including Wi-Fi Protected Access
Privacy (WEP), and Wi-Fi Protected Setup
a wireless network. WPS uses familiar methodologies, such as typed Personal
Identification Number (PIN) entry and push-button network-name configuration.
This automatically enables strong WPA/WPA2
data encryption and authentication.
Using Wi-Fi Protected Setup
When attempting to connect to a WPS-
enabled network, the following screen will
appear:
1.
Personal Identification Number (PIN)
Method: In this method, your N Wireless ExpressCard Adapter generates a
PIN to be entered into your router.
2.
Push-Button Configuration (PBC)
Method.
3.
Advanced Configuration Method:
For manual connection to a
secured network.
WPS uses WPA2 (described below)
for encryption. It does not provide
additional security. Instead, it
standardizes the method for securing
your wireless network. On your client utility, WPS-enabled networks are denoted
with the key icon. You may use either the PBC method or PIN method to allow a
device access to your wireless network. The two methods work as follows:
PBC: Push and hold the WPS button located on the back of your router for
three seconds. Then, initiate the WPS procedure on the client utility within
two minutes. Select the network name in the utility and click "Connect". Your
client will automatically exchange the security information and be added to your
wireless network. The PBC method can also be initiated from the client device.
2 (WPA2
TM TM
(WPS), which simplifies the setup of
TM
24 24
), Wired Equivalent