Power On/Off; Call Functions; Make A Call; Receive Call - Blaupunkt FM 03i Anleitung Für Schnelleinstellung

EN
the phone charging. Temperature influences battery capacity. Battery may
need to be cooled or warmed up before charging. If the battery temperature
is lower than 0 ° C or higher than 45 ° C, do not charge the battery. Use the
battery according to its intended purpose. Do not short-circuit the battery
terminals. Do not use a damaged battery. If you are using an appliance
under extreme temperature conditions, the battery will not work properly
and its life span will be reduced. DO NOT throw the battery into fire, follow
local laws and regulations regarding the disposal of the spent battery.

5. Power On/Off

Press and hold the End / On-Off button to turn the unit on or off.
1. If a SIM card is not inserted, it is defective or not fit correctly, a warning
message will be displayed after switching on the display. Turn off your device
and make sure the SIM card is inserted correctly.
2. If you insert the SIM card into the device, the PIN request and the phone
password are active, the device prompts you for the password and PIN code
and switches to standby mode.
After switching on, the phone automatically searches for the network. If the
device has found the allowed network, it will display its name and signal
strength.
If your device does not find a suitable network, you can only make an
emergency call or access non-network services on your phone.

6. Call functions

6.1. Make a call

When the network service provider name appears on the display, the phone
is ready to make and receive calls.
In Standby mode, press the number keys to enter the number you want to
call, press the right soft key to clear the wrong numbers, press the left soft
key or the dial key to start the call if the specified number is correct.
To enter an international phone number format, press and hold the [*] key
until "+" international call sign appears on the display.

6.2. Receive call

When an incoming call is alerted to your device if your service provider
supports the number display, the display shows the caller's number or the
caller's name (depending on whether you have saved it in the phone book).
1. Press the dial key or the left soft key and answer [Answer] to the incoming
call.
2. If Any key responds function is active, [Menu / Call center / Call Settings /
Advanced Settings / Answer mode / Anykey], you can answer any call using
any key except the Right softkey and the End / Off button.
4