Cleaning The Glass Panes - Privileg 6020CE2.334eETaDXv Gebrauchsanleitung

Page EN-20 The oven
Removing the oven door from its
hinges
The oven door can be removed from its
hinges to enable easy cleaning of all areas
of the oven:
1. Open the oven door completely.
X
2. Fold the clips X on both sides all the way
forward. Use a screwdriver if necessary.
3. Close the door only so far that it is still
open about 10 cm.
4. Lightly lift and guide the door forward out
of its hinges.
Replacing the oven door on its
hinges
1. Hold the oven door at an angle using both
hands.
2. Hook the hinges into the holes in the side
panels.
3. Open the oven door completely.
4. Fold the clips X on both sides all the way
back.
5. Close the door carefully. The door must
sit flush when closed. If the door does not
sit flush when closed or if there is a crack-
ing sound when closing it, the door is not
hung properly.
6. Correct the position of the hinges and
clips, if necessary, until the door opens
and closes smoothly again.

Cleaning the glass panes

The oven door contains three glass panels
that should occasionally be cleaned on both
sides. To do this you'll need a PH1 flat-head
screwdriver.
1. Take the oven door off its hinges (see
„Removing the oven door from its hinges"
on page EN-20).
2. Carefully removed the metal grid.