Cleaning The Grid And Filters - Atag HIDD074EX Serie Gebrauchsanleitung

Maintenance

Cleaning the grid and filters

1. Remove the grid with the filter from the extraction inlet.
2. Carefully slide the grease filter off the grid.
Clean the grid with hot water and neutral soap; without using abrasive sponges (do not use
detergents!). Do not wash the cast iron grid in a dishwasher.
Clean the grease filter, when in use, at least every week (or when the filter saturation indication
system indicates this necessity). This will maintain good performance of the extractor and prevent
a potential fire hazard, caused by excessive grease build-up.
Clean the grease filter with a non-aggressive detergents, preferably by hand or els in the
dishwasher, which must be set to a low temperature and a short cycle.
32