Input And Output Section - dB Technologies OPERA REVO Coax Quasi Bedienungsanleitung

English

INPUT AND OUTPUT SECTION

1. PRESETS
This button selects from three speaker equaliser
settings:
Flat - default setting, no equalisation active.
Playback - the response is optimised for playing
music.
Wedge - choose this setting when the speaker is
used as a stage monitor.
2. PRESET LED
The combination of the two LEDs indicates which
preset is active. If both are on, the Wedge preset
is selected.
3. INGRESSO AUDIO ("Balanced input")
Input compatible with a balanced XLR/jack cable
to connect the audio signal from a mixer or
another speaker.
4. USCITA AUDIO ("Link")
Output compatible with a balanced XLR/jack
cable to link the signal to other speakers in a daisy-chain configuration.
5. STATUS LED Main
The LEDs provide an immediate indication of the speaker status, in accordance with the logic summarised in the
table below:
Power up
Use
Partial malfunction
Partial malfunction
6. LEVEL
Knob to adjust the speaker level.
OPERA REEVO
2
1
Limiter
OFF
COMPRESSION SIGNAL OUTPUT
LIMITER STATUS
ACTIVE
CYCLIC FLASHING
4 6
Signal
OFF
STATUS
ACTIVE
OFF
Cod. 420120426 REV. 1.0
3
5
23