C - Location Of The Remote Control; Use Of The Appliance; A - Preliminary Operations; Instructions For Operation - Olimpia splendid CALEO GLASS Installations, Bedienungs And Wartungsanweisungen

3.2.c - Location of the remote control

Keep the remote control in a position from which the signal can reach the receiver
of the appliance (maximum distance is approx. 4 metres - with charged batteries).
The presence of obstacles (furniture, curtains, walls, etc.) between the remote
control and the appliance reduces the remote control range.

3.3 - USE OF THE APPLIANCE

3.3.a - Preliminary operations

• After installing the appliance as described in the previous
paragraphs, make sure the mains data correspond to what is
indicated on the appliance nameplate.
• Insert the plug in the power socket; the appliance emits a "beep"
and the key (A1) light up on the display.

3.4 - INSTRUCTIONS FOR OPERATION

When the appliance is switched on for the first time, you will hear a beep
and it will go into stand-by. All buttons will be disabled, with the exception
of the ON/OFF one. The keys of the control panel light up and on the display
is shown the detected room temperature.
The functions can be enabled or modified either from the control panel or
from the remote control.

3.4.a - ON/OFF key (A1)

When the appliance is in stand-by, all buttons are disabled, with the exception
of the ON/OFF button.
The starting mode is set to Heating (LED L4 on); all the functions are available.

3.4.b - Timer key (A2)

Press the key (A2) to enter Timer mode, press the keys (A5) or (A6) to increase
or decrease time according to this sequence:
(0h (Timer off) --> 1h --> 2h --> .. 23h --> 24h --> .. 0h (Timer off) --> ..).
When the function is active, the LED (L7) lights up.
EN - 13
CALEO GLASS