Klarstein Botella 166 Uno Bedienungsanleitung Seite 31

Removing the shelves for cleaning
• To remove any of the shelves from the rail
compartment, move the shelf to the position
where the notch of wooden shelf is exactly
under the plastic post and lift the wooden
shelf. Please ensure these are replaced when
the shelf is put back.
• Make sure the shelves are fully engaged
before loading any bottle into the cooler.
Pull the shelves out all the way to the STOP
position and push them back in several
times to make sure the shelves are properly
engaged.
Moving your wine cooler
If you need to move your wine cooler to another location you should follow the steps
outlined below.
• Remove all items from the wine cooler.
• Securely tape down all loose items such as the shelves inside the appliance.
• Turn the adjustable foot up to the base to avoid damage.
• Tape the door closed.
• Be sure the appliance stays secure in the upright position during transportation. Also
protect the outside of the appliance with a blanket or similar item.
Power failure
• Most power failures are corrected within a few hours and should not affect the
temperature of your appliance if you minimize the number of times the door is
opened.
• If the power is going to be off for a longer period of time, you need to take the
proper steps to protect the contents.
Note: If the appliance is unplugged, the power is lost or turned off you must wait 3
to 5 minutes before restarting the wine cooler. If you attempt to restart before this time
delay, the wine cooler will not turn on.
EN
31