English (Original Instructions); Technical Data - DeWalt DCS570 Bersetzung Der Originalanweisungen

EnGLIsH
184 mm CORDLESS CIRCULAR SAW
DCS570
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
Type
Battery type
No-load speed
Blade diameter
Maximum depth of cut
Blade bore
Bevel angle adjustment
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to
EN62841-2-5
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a
h, W
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
work patterns.
36
WALT one of the
e
DCS570
V
DC
min -1
mm
mm
mm
(-XE: 20 mm)
°
kg
dB(A)
dB(A)
dB(A)
= m/s
2
m/s
2
EC-Declaration of Conformity
Machinery Directive
Cordless Circular Saw
DCS570
18
WALT declares that these products described under Technical
D
e
2
Data are in compliance with: 2006/42/EC, EN62841-1:2015
+AC2015 +A11:2022, EN62841-2-5:2014.
Li-Ion
These products also comply with Directive 2014/30/EU and
5500
2011/65/EU. For more information, please contact D
184
the following address or refer to the back of the manual.
64
The undersigned is responsible for compilation of the technical
16
file and makes this declaration on behalf of D
57
3.6
Markus Rompel
Vice President of Engineering, PTE-Europe
D WALT, Richard-Klinger-Straße 11,
e
94
D-65510, Idstein, Germany
102
10.08.2022
3
DECLARATION OF CONFORMITY
<2.5
THE SUPPLY OF MACHINERY (SAFETY)
1.5
D WALT declares that these products described under "Technical
e
Data" are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
2006/42/EC, EN62841-1:2015 +AC2015 +A11:2022,
EN62841-2-5:2014.
These products also conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact D
address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
REGULATIONS 2008
Cordless Circular Saw
DCS570
WALT at the following
e
WALT at
e
WALT.
e
WALT.
e