Maintenance Activities - Holmatro GCU 50 i EVO 3 Serie Betriebsanleitung

Light
Blades
Snap ring of hinge pin
Centre bolt
Hinge pin
Carrying handle
Deadman's handle
1. The equipment must be thoroughly inspected, checked, set and tested. We recommend to
have this extensive maintenance performed by the Holmatro dealer (see also section 1.7).
8.5

Maintenance activities

8.5.1 General
• After every use:
1. Check the battery pack for damage and function.
2. If the battery pack is damaged or does not function correctly, replace the damaged battery pack.
3. Check the operation of the unit.
4. Check the unit for damage and leaks. If the unit doesn't work properly and/or leaks, have it
repaired by a Holmatro Certified Technician.
8.5.2 Light
• Check the light.
• Replace the battery if it gives little or no light.
• Have a Holmatro Certified Technician repair the light if a new battery does not solve the problem.
8.5.3 Carrying handle
• Check the carrying handle for damage. Replace a damaged carrying handle.
• Check the attachment of the carrying handle. If necessary, fasten it firmly by tightening the bolts or
by re-tightening the knob.
8.5.4 Deadman's handle
• Check whether the deadman's handle returns to the neutral position.
• Check the operation of the deadman's handle. Have the Holmatro dealer repair the deadman's
handle if it does not function properly.
GCU 50* (i) EVO 3
All manuals and user guides at all-guides.com
Check
Check
Check
Lubricate
Lubricate
Check
Check
916.001.652_002
EN
Time interval
x
x
x x
x x
x x
x
x
45