Technical Data - BOMANN KA 168 CB Bedienungsanleitung, Garantie

WARNING:
• Before cleaning, always remove the mains plug and wait until the
device has cooled down.
• Do not immerse the device in water. Otherwise this might result in
an electric shock or fire.
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
• The exterior of the device should be cleaned as necessary
with a slightly damp cloth – without any additives.
• Remove spilled coffee grounds with a paper towel from the
inner casing. Afterwards wipe with a damp cloth.
• You may clean the filter holder in the usual manner in a
warm rinsing bath.
• Do not immerse the flask in water. Wipe it on the outside
with a moist towel. You can rinse the flask with warm water
on the inside. Use a soft brush, if necessary.
Storage
• Clean the appliance as described and let it dry completely.
• For longer periods of non-use we recommend storing the
appliance in its original packaging.
• Always store the appliance in a well-ventilated and dry
place out of reach of children.
Troubleshooting
Problem Possible cause
The appliance The appliance is
does not work. not connected to
mains power.
The appliance is
defective.
36
Cleaning
Problem
Filter blockage:
coffee grounds
spill over the edge
of the filter.
Coffee grounds in
the coffee.
The brewing
process takes too
long.
Solution
Check the wall outlet
Model: .........................................................................KA 168 CB
with a different appli-
Power supply: .................................................230-240 V~, 50 Hz
ance.
Power consumption: ........................................................... 870 W
Insert the plug prop-
Filling quantity: .................................................... approx. 1.0 Liter
erly in the wall outlet.
Protection class: .......................................................................... I
Net weight: ........................................................... approx. 1.70 kg
Check the fuse.
Contact our service
The right to make technical and design modifications in the
or a repair center.
course of continuous product development remains reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations
Possible cause Solution
The drip stop is 1. Switch the appli-
closed: The coffee ance off. Discon-
pot is not on the nect from mains
warming plate or power supply.
the lid is not on the 2. Put the coffee
coffee pot. pot with lid on the
warming plate so
Too much coffee
that the filter is
powder in the filter.
emptied.
3. Dispose of the
paper filter.
4. Clean the appli-
ance as described.
The paper filter is Use a paper filter size
too small. "1x4".
Too much coffee Use less coffee
powder in the filter. powder.
Limescale deposits Decalcify the appli-
in the appliance. ance as described.

Technical Data