Accessories; Accessory Information; Ordering Accessories - Pfeiffer Vacuum HIPACE 80 NEO Betriebsanleitung

Accessories

13 Accessories
13.1 Accessory information
Fixing materials
Type-specific assembled packages, with centering ring and seal, ensure the secure fastening of the
vacuum pump. Optionally with splinter shield or protective screen.
Power supply packs and control units
Power supply packs for optimal voltage supply of Pfeiffer Vacuum products are characterized by their
compact size and adapted power supply with maximum reliability. Control units are used to check and
adjust operating parameters.
Cable and adapter
Mains, interface, connection, and extension cables provide a secure and suitable connection. Different
lengths on request
Venting accessories
A Pfeiffer Vacuum venting valve offers maximum operating and process security. Automatic control
through the integrated electronic drive unit of the turbopump.
Sealing gas supply
Sealing gas is used to protect the vacuum pump from dusty and corrosive processes, or excessive gas
throughputs. Sealing gas prevents the ingress of damaging substances into the motor and bearing area.
The supply is carried out either via a sealing gas valve or a sealing gas throttle without control.
Air cooling
For processes with low gas throughputs and good fore-vacuum pressure, air cooling can be used inde-
pendently of a water supply. Automatic control through the integrated electronic drive unit of the turbo-
pump.
Heating
Heating jackets enable the ultimate pressure to be reached more quickly during process cleaning. Auto-
matic control through the integrated electronic drive unit of the turbopump.
Backing pump control
The electronic drive unit of the turbopump enables useful control of backing pumps. Depending on the
backing pump used, different operating modes are available.
Integrated pressure measurement
Evaluation and control by the integrated electronic drive unit, independently of an additional power sup-
ply.
13.2 Ordering accessories
Selection field
Centering ring, FPM/aluminum, DN 40 ISO-KF
Centering ring with integrated mesh screen, DN 40 ISO-KF
Centering ring with integrated splinter shield, DN 40 ISO-KF
Centering ring with multifunction coating, DN 63 ISO-K/-F
Centering ring with multifunction coating and integrated splinter shield, DN 63
ISO-K/-F
Centering ring with multifunction coating and integrated protection screen, DN
63 ISO-K/-F
Elastomer seal, FKM, DN 63 CF
Elastomer seal, FKM, DN 63 CF
118/130
View the range of accessories for hybrid bearing turbopumps on our website.
Part number
PF 110 140 -T
PF 113 240 -T
PM 006 375 -X
PM 016 206 -U
PM 016 207 AU
PM 016 208 AU
402DFL063-S2
402DFL063-Z