Technical Specification; Dimensional Drawings - Wamsler SOSA Aufstellanleitung

Installation substructure (optional):

3. Technical specification

3.1 Dimensional drawings

TYP1881710 SOSA
1 - Place the base (A) in the desired location. Position
the oven on top of the base. Make sure the front and
sides of the oven are aligned with those of the base;
2 - Fix the base to the inner part of the oven using the
screws (B) and washers (C) through the existing holes in
the top of the base. Screws are included in the kit.
Pic. 11
31