Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Automatic cooking
Touch
to turn the oven on.
Touch the symbol
. This will light up in red.
The right display will show the
different automatic cooking
recipes available with the oven:
The name of the recipe will
appear on the left display.
Turn the function selector to
the right or left to select the
desired recipe. Then press the
function selector.
You will hear a double beep confi rming the recipe that you have
chosen. The oven will begin cooking and in most cases you will see the
following information on the display:
The symbol for the chosen recipe and
its automatic cooking temperature are
shown. The pre-programmed weight for
this option fl ashes.
Turn the function selector to change the weight of the food that is to be
cooked.
Finally, press the function selector to accept the selection.
You will hear a double beep confi rming
the programmed recipe. The oven will be-
gin cooking and you will see the following
information on the display:
The symbol for the chosen recipe, the automatic cooking temperature
and calculated cooking time will be shown.
Important information about automatic cooking
with recipes
When you select a recipe and enter a weight, the oven automatically cal-
culates the temperature and cooking time needed, but these values can
be changed. Cooking time starts from a cold oven unless pre-heating
has been specifi cally indicated.
It is very important to select the correct food weight so that the ingre-
dients will be properly cooked.
When cooking with a thermoprobe, the oven will determine the cooking
temperature only. The cooking time will depend on the temperature
setting programmed for the thermoprobe.
With roasting programmes, after a certain time has passed the oven will
advise you that the joint of meat should be turned over. When it is time
to do this, the oven will beep.
You will also see
on the display
until you have turned the roast over. If
you do not turn the roast over, the oven
will continue cooking according to the
programmed automatic cooking recipe.
EEB 6860.0
The oven should be pre-heated for white and rye bread and thin-crust
and thick-crust pizza base recipes. In this way the oven will be at the
ideal temperature for the best results. Pre-heating is not needed for the
other recipes.
Follow these instructions when cooking with these recipes:
– Set the recipe fi rst. The oven will begin pre-heating.
Do not put the food into the oven until the signal is given.
– During pre-heating, the symbol of the programmed recipe and the
symbol
will fl ash on the display.
– When the set temperature is reached, the oven will beep. You can now
put the food into the oven.
– The oven will continue to beep until you put the food in.
– The food will be cooked automatically according to the recipe settings.
Changing the weight of the food to be cooked
If you wish to change the food weight, the cooking time or tempe-
rature may change automatically according to the parameters of the
programmed recipe. To change the weight of the food:
Touch
. This will light up in red.
The display will show
and the
weight of the food to be cooked
according to the recipe you have
programmed.
Turn the function selector to change the weight of the food that is to be
cooked.
Finally, press the function selector to accept the selection.
Changing the cooking temperature
The cooking temperature is pre-programmed for all cooking functions.
It is only possible to adjust the temperature within a predetermined range
when using the automatic cooking function. The temperature can be freely
selected for conventional cooking functions in a range between 50°C
(no temperature adjustment) and 250°C.
If you want to change the cooking temperature:
Touch
. This will light up in red.
You will see the
symbol and the set
temperature for this cooking function
on the display.
Turn the function selector to specify the new cooking temperature.
Press the function selector to accept the selection.
33
Werbung
Inhaltsverzeichnis
