ejected from the battery; avoid contact.
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
Do not use a battery pack or tool that is
batteries may exhibit unpredictable behaviour
Do not expose a battery pack or tool to
explosion.
Follow all charging instructions and
do not charge the battery pack or tool
in the instructions. Charging improperly or
Service
Have your power tool serviced by
identical replacement parts. This will ensure
that the safety of the power tool is maintained.
Never service damaged battery packs.
Service of battery packs should only be performed
by the manufacturer or authorized service
providers.
Drill Safety Warnings
Safety Instructions for All Operations
Hold the power tool by insulated
gripping surfaces, when performing an
operation where the cutting accessory
or fasteners may contact hidden wiring.
Cutting accessory or fasteners contacting a "live"
wire may make exposed metal parts of the power
tool "live" and could give the operator an electric
shock.
Safety instructions when using long drill
bits
Never operate at higher speed than
the maximum speed rating of the drill
bit. At higher speeds, the bit is likely to bend if
allowed to rotate freely without contacting the
workpiece, resulting in personal injury.
Always start drilling at low speed
and with the bit tip in contact with
the workpiece. At higher speeds, the bit is
likely to bend if allowed to rotate freely without
contacting the workpiece, resulting in personal
injury.
Exposure
Apply pressure only in direct line with
the bit and do not apply excessive
pressure. Bits can bend causing breakage or
loss of control, resulting in personal injury.
Wear ear protectors when drilling.
Exposure to noise can cause hearing loss.
Secure your workpiece with a clamping device. A
workpiece clamped with clamping devices or in a
vice is held more secure than by hand.
Always wait until the product has come to a
complete stop before placing it down. The tool
insert can jam and lead to loss of control over the
power tool.
Do not open the battery. Danger of shortcircuiting.
Protect the battery against heat, e.g., against
moisture. Danger of explosion.
In case of damage and improper use of the battery,
vapours may be emitted. Provide for fresh air and
seek medical help in case of complaints. The
vapours can irritate the respiratory system.
Use the battery only in conjunction with your Würth
power tool. This measure alone protects the battery
against dangerous overload.
Use only original Würth batteries with the voltage
listed on the nameplate of your power tool. When
using other batteries, e. g. imitations, reconditioned
batteries or other brands, there is danger of injury
as well as property damage through exploding
batteries.
Use only original Würth accessories.
18