Configuration - Vimar ELVOX PIXEL UP 40414.S Installationsanleitung

PIXEL UP: 40414.S
3.

Configuration

The complete configuration of the electronic module is done via PC, using the Web configuration interface. Both the device and the
PC must be connected on the same LAN.
Some basic interface parameters and outdoor station functions can be configured via the display and keyboard.
3.1. Local configuration via the display
There are two access levels for the configuration menu, both password-protected:
- Installer: has access to all sections of the configuration menu.
- Administrator: has access only to the Display section (language, colours, fonts).
To access the configuration menu, press
trator password. The default passwords are:
- Installer:
- Administrator:
The passwords can be edited in the specific section or via the Web configuration interface, and must consist of a sequence of 5
buttons, among: (UP),
12
LAN
(UP) and (DOWN) together for 5 seconds, then enter the installer or adminis-
(DOWN), (OK).
EN