Introduction; Layout; Scope Of Delivery - Scheppach RM420 Originalbetriebsanleitung

1. Introduction

Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We hope your new tool brings you much enjoyment
and success.
Note:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by
the product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
We recommend:
1 Read through the complete text in the operating
instructions before installing and commissioning
the device.
2 The operating instructions are intended to help the
user to become familiar with the machine and take
advantage of its application possibilities in accord-
ance with the recommendations..
3 The operating instructions contain important
information on how to operate the machine safely,
professionally and economically, how to avoid dan-
ger, costly repairs, reduce downtimes and how to
increase reliability and service life of the machine.
4 In addition to the safety regulations in the operating
instructions, you have to meet the applicable regu-
lations that apply for the operation of the machine
in your country.
5 Keep the operating instructions package with
the machine at all times and store it in a plastic
cover to protect it from dirt and moisture. Read the
instruction manual each time before operating the
machine and carefully follow its information. The
machine can only be operated by persons who
were instructed concerning the operation of the
machine and who are informed about the associ-
ated dangers. The minimum age requirement must
be complied with.
6 In addition to the safety requirements in these
operating instructions and your country's applica-
ble regulations, you should observe the generally
recognized technical rules concerning the opera-
tion of identical constructed machines.
 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

2. Layout

Fig. 1 (1 - 18)
1. Handle
2. ----
3. Engine brake lever
4. Upper push bar
5. Quick-release lever
6. Petrol tank
7. Air filter
8. Primer button
9. Wheel
10. Spark plug
11. Exhaust
12. Dip stick
13. Drive wheel
14. Wheel height adjustment
15. Discharge flap
16. Grass box
17. Pull starter
18. cable clips
a 4 x round head screw
b 4 x washer
c 1 x manual

3. Scope of delivery

Fig.1 (a - c)
• Open the packaging and remove the device care-
fully.
• Remove the packaging material as well as the
packaging and transport bracing (if available)
• Check that the delivery is complete.
• Check the device and its spare parts for possible
damage caused by transportation. In the event of
complaints, you must contact the distributor without
delay. Claims at a later stage will not be accepted.
• If possible, store the packaging until the warranty
period has expired
• Before handling the device, make yourself familiar
with it by reading the operating instructions.
• For accessories, consumables and spare parts,
only use original parts. Spare parts are available
from your stockist.
• Include our item number, the device model and
year of manufacture in your order.
m Attention!
The device and packaging materials are not toys!
Children must not be allowed to play with plastic
bags, film and small parts!
m Danger
There is a risk of swallowing and suffocation!
Seite 21 von 48 Seite 21 von 48