through a channel, is collected in a drip tray located
on the compressor, where it will evaporate. Make
sure the water discharge opening does not get
clogged. A light formation of ice on the interior back
during operation is normal.
A permanently high power level can lead to increa-
sed ice formation. In this case, the fridge can be de-
→ set a lower power level.
frosted manually
To achieve better cooling and to save energy, defrost
the freezer regularly as follows:
To start the defrosting process, turn the tempera-
ture control to the off state and disconnect the
plug or turn off the fuse.
Remove the food items and keep covered at a
cool location.
When the ice has melted, wipe the condensate
away and dry the appliance interior.
Then you may restart the appliance by connecting
the plug and turning the temperature control.
Changing the bulb
CAUTION:
Do NOT remove the cover of the interior light.
The LED light may be replaced / repaired in case of
failure / defect only by an authorized specialist.
Troubleshooting
Before you contact an authorized specialist
Problem
Cause / Action
Unit is not
∙ Check the power supply / tem-
working
perature setting / ambient temper-
properly or
ature. ∙ Unblock the ventilation
at all
openings, install the unit freely.
Loading is
∙ Check the temperature setting /
too warm
ambient temperature. ∙ Open the
door only as long as necessary.
Problem
Cause / Action
Loud noise
∙ Check the appliance position.
during opera-
∙ See the section
tion
noise"
Water on the
∙Check the temperature setting /
unit bottom
water discharge channel or open-
ing.
Light does
∙ Check the power supply.
not work
∙ See
NOTE:
If a problem persists after following the steps above,
contact your trader or an authorized technician.
Technical Data
Climate class N/ST: this appliance is intended to be
used at ambient temperature ranging from 16°C to
38°C.
Electrical connection............................................
Power voltage: .........................220-240 V~ / 50 Hz
Rated power: .............................................115 W
Rated current: .............................................0.75 A
Dimension H x W x D / Weight...............................
Appliance size: .....................180.0 x 55.0 x 56.0 cm
Net weight: ..................................approx. 50.0 kg
For more information about the product, scan the QR
code on the supplied energy label and/or visit the
official website of the product data bank:
https://eprel.ec.europa.eu
The right to make technical and design modifications
during continuous product development remains
reserved.
This appliance has been tested according to all rele-
vant current CE guidelines, such as electromagnetic
compatibility and low voltage directives, and has
been constructed in accordance with the latest safety
regulations.
25
"Operating
.
"Changing the bulb"
.