Warnings; Liability - DAB MCE-150/P Installations- Und Wartungsanleitungen

In this document, the following symbols have been used:
General danger. Failure to observe the warnings alongside this symbol can cause damage or
physical injury.
Risk of electric shock. Failure to observe the warnings alongside this symbol can cause serious
hazards with risk to personal safety.
Notes
Carefully read this manual before performing any operations
Keep this manual in a safe place for future consultation.
Electrical and hydraulic connections must be made by qualified personnel in possession of
the technical requirements as specified by current safety standards in the country of product
installation.
The term "qualified personnel" refers to all persons specially trained, instructed and with the relative experience
and knowledge of relative standards, prescriptions and provisions for accident prevention and working
conditions, and are therefore authorised by the system safety supervisor to perform all necessary tasks, and
are aware of and able to avoid any hazards. (Definition of technical personnel according to IEC 364).
The products dealt with in this discussion fall within the type of professional equipment and belong to insulation
class 1.
It will be the task of the installer to ensure that the electrical power installation is equipped with an efficient
earthing system in accordance with current standards.
To improve immunity against possible noise radiated to other equipment, separate routing of electrical power
cables of the inverter is recommended.
Failure to observe these warning may lead to hazardous situations with risks to persons or objects, rendering
the product guarantee null and void.
The manufacturer denies all liability for malfunctions in the event of incorrect product installation, tampering,
modifications, improper use or application not compatible with dataplate specifications.
The manufacturer shall also not be liable for any inaccuracies in this manual, when due to printing or
transcription errors.
The manufacturer reserves the right to apply modifications to the product when deemed necessary or
appropriate, without impairing the essential characteristics.
Liability of the manufacturer remains exclusively with the product itself, excluding costs or further damages
due to malfunctions of installations.
ENGLISH
KEY

WARNINGS

LIABILITY

68