Cleaning - Atag WU90PMM Serie Bedienungsanleitung

MAINTENANCE

Cleaning

Attention! Before performing any maintenance operation, isolate
the hood from the electrical supply by unplugging the appliance or
switching off your household's master switch. The cooker hood should
be cleaned regularly (at least as frequently as the grease filters are
cleaned) both internally and externally. Do not use abrasive products.
Do not use alcohol!
Attention! Failure to comply with the basic recommendations for
cleaning the cooker hood and cleaning/replacing the filters may lead to
a fire. Therefore, we recommend that you observe these instructions.
The manufacturer declines all responsibility for any damage to the
motor or any fire damage linked to inappropriate maintenance or failure
to observe the above safety recommendations.
Cooker hood
Clean the cooker hood with soapy water and a soft cloth. Then wipe
with clean water to rinse. Do not apply aggressive cleaning agents such
as caustic soda. The paintwork on the cooker hood will remain shiny if
it is periodically rubbed with wax.
Stainless steel canopy hoods
Do not use any sort of scourer. Treat with a stainless steel care product
and polish with the structure of the stainless steel.
Metal grease filters
These must be cleaned once a month (or when indicated by the filter
saturation indication system), using non-aggressive detergents, either
by hand or in the dishwasher, which must be set to a low temperature
and a short cycle. The openings must be placed downwards to let the
water run out of the filters. When washed in a dishwasher, aluminium
grease filters may be discoloured slightly. This is normal and does not
affect their filtering capacity.
EN 7