Led Indicating State; Osd (On Screen Display) Menu Settings; Mute Function - urmet vmodo 1719/1 Installations- Und Gebrauchsanleitung

LED INDICATING STATE

State
STAND-BY
Button
LED off
LED off
LED off
Red LED
blinking
MUTE 8h
Red LED on
fi xed: MUTE
LED off
LED off
Green LED
on blinking
(only when
the automatic
door opening
function is on)

OSD (ON SCREEN DISPLAY) MENU SETTINGS

To access the OSD menu, press and hold the
during a video call or self-plugging.
Press the button briefl y to scroll in sequence through the three parameters in sequence:
1) BRIGHTNESS
2) COLOUR
3) SHOW IMAGES IN 4:3 OR 16:9 FORMAT
These parameters are adjusted using the and
to the right and left respectively (for further details see the "BUTTON FUNCTION" table mentioned above).

MUTE FUNCTION

This function can be used to mute the ring tone on the video door phone and any connected supplementary
ringers. The function can be activated in two different ways:
• MUTE 8h: Hold button
In the event of a power failure, the MUTE 8h function will restart from zero as if it had just been
activated.
16
RINGING
ON-HOOK DURING AUDIO
(receiving OPERATION
call)
Green LED on
Green LED on fi xed
fi xed
LED off
LED off
Red LED
Red LED blinking
blinking
MUTE 8h
Red LED on fi xed:
Red LED on
fi xed: MUTE
Green LED on
Green LED on blinking
fi xed
Green LED on
Green LED on fi xed
fi xed
Green LED on
Green LED on fi xed
fi xed
pressed to mute the video door phone for up to 8 hours.
STAND-
BY AND
BUTTON
PRESSED
Green LED on
LED off
LED off
Red LED
blinking
MUTE 8h
MUTE 8h
Red LED on
MUTE
fi xed: MUTE
Green LED on
Green LED on
Green LED
on blinking
(only when
the automatic
door opening
function is on)
button for an extended period (longer than 5 seconds)
buttons that move the control bar of the single parameter
PROGRAMMING
STATE (WITH VIDEO
DOOR PHONE ON
STAND-BY)
LED off
fi xed
LED off LED off
LED off LED off
Red LED blinking
LED off
fi xed
LED off
fi xed
Green LED on blinking
(only when the automatic
door opening function
is on)
DS1719-004