WAGNER WallPerfect Flexio 990 Originalbetriebsanleitung Seite 60

GB D
Warning
If the supply cord of this appliance is
damaged, it must only be replaced by a
repair shop appointed by the manufacturer,
because special purpose tools are required.
The wires in this mains lead are coloured in
accordance with the following code:
green/yellow = earth
blue = neutral
As the colours of the wires in the mains
lead of this appliance may not correspond
with the coloured markings identifiying the
terminals in your plug, proceed as follows:
•
The wire which is coloured green and
yellow must be connected to the terminal in the plug which is marked with the letter
E or by the earth symbol or coloured green or green and yellow.
•
The wire which is coloured blue must be connected to the terminal which is marked
with the letter N or coloured black.
•
The wire which is coloured brown must be connected to the terminal which is marked
with the letter L or coloured brown.
•
Should the moulded plug have to be replaced, never re-use the defective plug or
attempt to plug it into a different 13 A socket. This could result in an electric shock.
•
Should it be necessary to exchange the fuse in the plug only use fuses approved by
ASTA in accordance with BS 1362. Only 13 Amp fuses may be used.
•
To ensure that the fuse and fuse carrier are correctly mounted please observe the
provided markings or colour coding in the plug.
•
After changing the fuse, always make sure that the fuse carrier is correctly inserted.
Without the fuse carrier, it is not permissible to use the plug.
•
The correct fuses and fuse carriers are available from your local electrical supplies
stockist.
58 58
brown = live
WallPerfect Flexio 990 WallPerfect Flexio 990