Technical Information; Overload Protection A Built-In Overload Protection Protects The Switched; Notes About Using This Model For The First Time; Preparations - Märklin 29188 Bedienungsanleitung

1 track end with a bumper
1 no. 66201 switched power pack
1 IR Controller
2 type AAA/LR 03 1.5 volt batteries
1 construction Vehicle
Construction site kit
Operating instructions
Operating instructions
Warranty card

4. Technical Information

Switched power pack:
Voltage supply train:
Power consumption of train
H0 Gauge (1:87 scale)
4.1 Overload Protection
A built-in overload protection protects the switched
power pack from damage in the event of an overload
or a short circuit. All lokomotives will be stopped.
See also point 10.
5. Notes about Using this Model for
the First Time
• The switched power pack may not be plugged
into the wall outlet yet.
• Set up the layout as shown in Part 6.

6. Preparations

6.1 Joining Track Sections and Setting up Track
When setting up the track, please note the track
numbers and the sequence for the track sections.
10
GB F NL
D
DK
S
input 230 volts AC
output 18 volts DC/18 VA
max 22 volts DC
max 13 VA
Putting track together
Taking
track apart
Layout
!