Push-Button - Walimex Pro Emerger Gebrauchsanleitung

1 Digital Display OUTPUT POWER
2 Standby display LED
3 Push-button AUDIO
4 LED AUDIO
5 Push-button TEST
6 LED SLAVE
7 Push-button SLAVE
8 Connecting Socket for sync cord
9 Ventilation slots
10 Socket for power cord
11 Fuse holder
12 Main Switch O/I (OFF/ON)
13

Push-button

14 Push-button MODEL
15
Push-button
16 LED MODEL
17 Photo cell
18 Handle
43


Shows the power level of the modeling light and
the control value for flash power
Lights when the adjusted flash power is reached
(device ready for flashing)
Switches the acoustic beeper button on
Lights when the audible standby indication is
switched on.
Triggers a test flash
Lights when the photo cell is switched on.
Switch on and off for photo cell
Connection socket for sync cord or remote
receiver (optional)
Provide cooling for the flash
Connection for external power supply
Contains the micro-fuse and spare fuse
Switches the device on and off
Reduces the flash power /
settings for radio remote triggering
Switches the modelling light on/off
Increases the flash power /
settings for radio remote triggering
Modeling light power setting
To trigger the photo cell
To carry the flash.