Button Function; Prepare Flash For Use; Fix Flash On Light Stand; Remove Protective Cap - Walimex Pro Stager Gebrauchsanleitung

4.2 Button Function

Button operation function
Button Bedienung
MODE Short Press
MODEL Short Press
Short Press
AUDIO
Long Press 4 seconds
Short Press
SLAVE
Long Press 4 seconds
TEST Short Press
Rotate
Regulator
Short Press (In Multi Mode)

5. Prepare Flash for Use

5.1. Fix Flash on Light Stand

Select a light stand or support system of
suitable weight and dimensions to ensure
stable operation of the unit. Rotating "Light
Stand Locking knob" clockwise to lock flash
unit firmly on support system.

5.2. Remove Protective Cap

Please remove the rubber cap on the latch
knob before use. To remove protective cap,
push "reflector Release Knob" back towards
the rear of the unit and rotate protective cap
anti clockwise (Figure 1). Put the protective
cap aside.
Funktion
Select M/MULTI in sequence
Adjust brightness of modeling lamp
Turn on and off audio beep
Set color temperature mode
Turn on and off optical slave
Set channel, group and ID
Test
Adjust parameter
Set number of flash and flash frequency
WARNING
Do not operate the flash with the protective
cover still in place. To avoid deformation of
plastic protective cap, always cool down
flash unit before fitting protective cap.
Figure 1
29