Important information:
• The network settings of the LAN module have
been preset ex works� You may have to adapt
them before the first use� This depends on
your existing network setting�
• Firewalls can block access to the LAN module�
Make sure that the router or the network
security software used allows access to the
LAN module�
• To access the LAN module, change settings or
manage it, you must open the administration
area (web server) and log in�
The host name of the LAN module has
been preset ex works: http://lanmodule/ or
http://192�168�1�60
GB
EN
• If you install more than one LAN module in the
same network, they must not have the same
host name�
(e�g� Lanmodul_A, Lanmodul_B, etc�)�
• Used Ports:
– UDP
26000
– TCP
23000
– HTTP 80
– SMTP 25
To guarantee the Internet access, activate the
port forwarding of the above mentioned ports
in the router�
43