Whirlpool WMBD5 I4 PT Referenzhandbuch Seite 5

When the default setting appears on the display and the
icon flashes, turn the rotary knob to set the weight
and then press to confirm.
. MANUAL FUNCTIONS
After having selected the function you require, you can
change its settings.
The display will show the settings that can be changed
in sequence.
MICROWAVE POWER
When the icon flashes on the display, turn the rotary
knob to adjust the power setting and then press
confirm and continue to alter the settings that follow (if
possible).
Please note: Once the function has been activated, the power
can be changed by pressing
then turning the rotary knob to change the setting.
DURATION
When the icon flashes on the display, use the rotary
knob to set the cooking time you require and then
press to confirm or press
function.
Note: During cooking, you can adjust the cooking time by
turning the rotary knob; each time you press
time increases by 30 seconds.
3. ACTIVATE THE FUNCTION
Once you have applied the settings you require, press
to activate the function.
Every time the button is pressed again, the cooking
time will be increased by a further 30 seconds.
Please note: You can press
that is currently active.
. JET START
When the oven is switched off, it is possible to press
to activate cooking with the microwave function set at
full power (1000 W) for 30 seconds.
to access the settings menu,
to confirm and start the
, the cooking
at any time to stop the function
. SAFETY LOCK
This function is automatically activated to prevent the
oven from being switched on accidentally.
Open and close the door, then press
function.
4. PAUSE
To pause an active function, for example to stir or turn
the food, simply open the door.
To start it up again, close the door and press
AUTOMATIC PAUSE
(TURN OR STIR FOOD)
Certain functions will pause to allow you to turn or stir
the food.
to
Once the oven has paused cooking, open the door
and carry out the action you are prompted to perform
before closing the door again and pressing
continue with cooking.
5. COOKING END
An audible signal will sound and the display will
indicate that cooking is complete.
To extend the cooking time without changing the
settings, turn the rotary knob to set a new cooking time
and press .
. KEY LOCK
To lock the keypad, press and hold
seconds.
Do this again to unlock the keypad.
Please note: The key lock can also be activated while cooking
is in progress. For safety reasons, the oven can be switched off
at any time by pressing and holding
EN
to start the
.
to
for at least 5
.
5