Energy Saving Tips; Connecting The Cooler - Dometic CFX 35L Bedienungsanleitung

CFX28 – CFX65DZ
Selecting the temperature units
Temperature display units can be switched between Celsius and Fahrenheit as
follows:
➤ Switch on the cooler.
➤ Press the "SET" button (fig. 3 4, page 3) twice.
➤ Use the "UP +" (fig. 3 7, page 3) or "DOWN –" (fig. 3 6, page 3) buttons to
select Celsius or Fahrenheit.
✓ The selected temperature units then appear in the display for a few seconds. The
display flashes several times before it returns to the current temperature.
7.2

Energy saving tips

•
Choose a well ventilated location which is protected from direct sunlight.
•
Allow warm food to cool down first before placing it in the cooling device to
keep cool.
•
Do not open the cooling device more often than necessary.
•
Do not leave the cooling device open for longer than necessary.
•
Defrost the cooler once a layer of ice forms.
•
Avoid unnecessarily low temperatures.
7.3

Connecting the cooler

Connecting to a battery (Vehicle or boat)
The cooler can be operated with 12 V
A
NOTICE! Danger of damage!
Disconnect the cooler and other consumer units from the battery before
you connect the battery to a quick charging device.
Overvoltage can damage the electronics of the device.
For safety reasons the cooler is equipped with an electronic system to prevent
polarity reversal. This protects the cooler against short-circuiting when connecting to
a battery.
EN
g g
or 24 V .
Operation
15