Electrolux ERB29003W8 Benutzerinformation Seite 27

Rear spacers
In the bag with the documentation, there
are two spacers which must be fitted as
shown in the figure.
Slacken the screws and insert the spacer
under the screw head, then tighten again the
screws.
3
Levelling
When placing the appliance ensure that it
stands level. This can be achieved by two
adjustable feet at the bottom in front.
Removing the shelf holders
Your appliance is equipped with shelf retain-
ers that make it possible to secure the
shelves during transportation.
To remove them proceed as follows:
1. Move the shelf holders in the direction of
the arrow (A).
2. Raise the shelf from the rear and push it
forward until it is freed (B).
3. Remove the retainers (C).
Downloaded from Fridge-Manual.com Manuals
All manuals and user guides at all-guides.com
2
1
Door reversibility
Important! To carry out the following
operations, we suggest that this be made
with another person that will keep a firm hold
on the doors of the appliance during the
operations.
To change the opening direction of the door,
do these steps:
1. Open the door with the appliance in the
Warning! Before carrying out any
operations, remove the plug from the
power socket.
upright position. Unscrew the screws (t1)
and remove the upper door plastic trim
(t2). Close the door.
t1
t1
d7
electrolux 27
t1
t2
t3