Filter Cleaning - Domo DO310A Gebrauchsanleitung

DO310A
Note :
The air exhaust duct can be extended from 0,5 m to 1,5 m. The unit works more
efficiently while the air exhaust duct is shorter.
Please make sure the air exhaust duct is not distorted, or heat cannot flow back to
increase the units interior temperature. If so the unit will stop running automatically.
Please make sure not to use other exhaust ducts, or extensions on the air exhaust duct.
Otherwise the unit working efficiency will decrease.

FILTER CLEANING

Open the air inlet grill, pull the air filter from the inlet grill.
Wash the air filter by immersing it gently into warm water to wash out accumulated
dust and lint. IF the filter is very dirty, add mild household detergent in the water.
Let the filter dry thoroughly.
Place the filter back in the air inlet grill. Place the grill back in the unit.
Note :
Turn off the unit and unplug before cleaning.
If the air filter is blocked, the airflow volume will decrease. We suggest cleaning the
filter once very two weeks or more often if necessary.
Let the filter dry thoroughly before reinstalling it.
HOW TO DRAIN THE CONDENSE WATER
When the unit is running at cool mode, condense water will drain into the water tank.
Buzzer will sound when the water tank is full and error code „E4" will display on the
LCD. At the same time cooling sytem stops running automatically and the fan will
stop after 3 minutes.
Draining the water tank
Place the drainage box under the drainage hole
Disconnect he stopple drainpipe, then the condensed water will automatically flow
out.
When the drainage box gets full, push the stopple drainpipe back into the drainage
hole, and empty the drainage box.
Repeat above steps unitl the water tank is empty.
32