4 .
Programming
Note:
Press
4.1.
Touchscreen controller quick start
Note:
If the screen is blank after plugging in the unit, touch the screen to turn the screen on.
Format screen
language
Press the
button and use the arrows
displayed language: English, French, German, Italian, Spanish, Dutch or
Portuguese.
units
• Press the
button to adjust the system's units of measure (either U.S.
or metric);
hardness units
• press the
measure (grains per gallon, mg/L or ppm, German degrees, French
degrees, or English degrees). Hardness units are adjustable only if metric
units are selected.
Assistance interval screen
Use the assistance interval screen to set the interval the controller will display
a message telling that the system need a service (optional). The assistance
interval can be based on a set number of months (month based) or a number
of regenerations (regen based).
interval
• Press the
button to select a month-based or regen-based
assistance interval, then press
button (depending on your previous selection), and select the number of
months (up to 60) or regenerations (up to 2000) until the homeowner will
need to call for service;
• press
to validate the selection and move to the home screen.
Home screen
On the upper left corner, the
current day and time. Theupper right corner indicates the remaining time or
volume to next regeneration. On the middle circle, the green box indicates the
current cycle step. The buttons down on the right allow to navigate through the
different screens. From left to right, we have:
diagnostics
settings
,
and
Ref. MKT-UG-018 / C - 09.10.2019
on any Quick Start screen to reset the screen back to its default settings.
button to adjust the system's hardness units of
. Press either the
day and time
button allows to update the
vacation
regeneration
.
to adjust the system's
month
regen
or
.
12:01 am
assistance
,
,
User Guide Fleck 5810-XTR
Format
language
units
hardness units
Assistance/Mainten. Interval
interval
month
Water Treatment
wed
treatment
tank refill
rapid rinse
english
metric
mg/L
month
based
1
4.5
3
m
backwash
draw
7 / 52