This standard covers the safety of dust extractors with electric motors, including dust separators and back-pack vacuums, used
for wet extraction, dry extraction or wet-and-dry extraction, supplied for commercial use indoors and for outdoor use with and
without accessories for the collection of combustible dust in an atmosphere (Zone 22) designated as explosive.
WARNING
The machine is equipped with a Hot surface sticker and is located at the engine exhaust to indicate that there
may be a warm surface.
CAUTION
Note that the machine is not left unattended and should be switched off on the machine switch or the plug is
separated from the mains voltage.
CAUTION
The machine contains hazardous dust. Emptying and maintenance operations, including removal of the dust
extraction container, must only be carried out by qualified personnel who must wear appropriate protective
equipment. Do not use the unit without the entire filter system in place.
Technical data
HxWxL [mm]
Weight [kg]
Inlet [mm]
Hose length Ø 50 [m]
Collecting container [l]
3
Max. flow [m
/h]
Negative pressure, max. [kPa]
Power [W]
Fine filter, polyester, area [m
Degree of separation, fine filter, EN 60335-2-69, Class M [%]
Filter area, HEPA filter [m
Filter classification, EN 1822-1
Degree of separation, machine, EN 60335-2-69, Appendix A-A, Class H [%]
Sound level [dB(A)]
18
2
]
2
]
1800/2800 H EX, Art.nr. Part 94169-K
DC 1800H EX
DC 2800H EX
840 x 400 x 400
1200 x 440 x 600
16,5
24,5
Ø 50
Ø 50
5
5
20
40
200
200
27
27
1500
1500
1,5
1,5
99,9
99,9
0,85
0,85
HEPA H13
HEPA H13
99,995
99,995
70
70