Starting Up; Setting The Heating Period Limit; Settings In The Options Menu - Sentiotec CV 31 Montage- Und Gebrauchsanweisung

Installation instructions, only for experts

7. Starting up

7.1. Setting the heating period limit

Setting the heating period limit
The maximum heating period is set to 6 hours as standard. The sauna control unit
shuts down automatically after the maximum heating period for safety reasons.
Using the 2 x 2-pin connector on the top control board, the maximum heating
duration can be set to 12, 18 or 24 hours. The jumpers required to do so can be
ordered from us (O-JUMP).

7.2. Settings in the Options menu

To access the Options menu, press simultaneously the UP/DOWN
6 buttons and hold them down while turning the control
START/STOP
unit on using the
► The following appears in display
WORLD OF WELLNESS
ON/OFF switch
1
hours
hours
hours
hours
.
0
: _ _ _
5
p. 16/34
7 and