Fronius PullMig Bedienungsanleitung Seite 19

General
Device concept PullMig is a wire feed unit for manual welding using soft welding wires and with
long hose packs. Two toothed precision rolls ensure large-surface power trans-
mission. This leads to outstanding wire feed even with very soft aluminium and
CuSi wires and very long hose packs. The many different versions of PullMig
available are one of its distinguishing features.
Thus there are several variations of torch connections available with both exter-
nal and internal coolant connections. A variety of pipe bend designs ensures ex-
cellent weld accessibility.
Proper use The MIG/MAG manual welding torch is intended solely for MIG/MAG welding in
manual applications.
Any use above and beyond this purpose is deemed improper. The manufacturer
shall not be held liable for any damage arising from such usage.
Proper use includes:
-
-
Safety
Danger from incorrect operation and work that is not carried out properly.
This can result in serious personal injury and damage to property.
▶
▶
▶
Danger from electrical current.
This can result in serious personal injury and damage to property.
▶
▶
▶
Danger from electric current due to defective system components and incor-
rect operation.
This can result in serious personal injury and damage to property.
▶
▶
Carefully reading and following all the instructions given in the operating in-
structions
Performing all stipulated inspection and maintenance work.
WARNING!
All the work and functions described in this document must only be carried
out by technically trained and qualified personnel.
Read and understand this document in full.
Read and understand all safety rules and user documentation for this device
and all system components.
WARNING!
Before starting work, switch off all devices and components involved and dis-
connect them from the grid.
Secure all devices and components involved so they cannot be switched back
on.
After opening the device, use a suitable measuring instrument to check that
electrically charged components (such as capacitors) have been discharged.
WARNING!
All cables, leads and hosepacks must always be securely connected, unda-
maged and correctly insulated.
Only use adequately dimensioned cables, leads and hosepacks.
19