Siemens TI351-Serie Gebrauchsanleitung Seite 51

' LED flashes and all bever-
age LEDs flashing.
All LEDs flashing.
', ( and calc'nClean LEDs
flashing.
( and % LEDs flashing. Brewing unit very heavily soiled
% LEDs flashing.
calc'nClean and ) light up.
Display "calc'nClean" keeps on
appearing.
If you are unable to solve the problem, always call the hotline.
You will find the telephone numbers at the back of these instructions
--------
Water tank is missing or not
inserted correctly.
The pipe system in the appli-
ance is dry.
Air in the water filter.
Incorrect voltage in building.
The ambient temperature is too
cold.
or brewing unit cannot be
removed.
Fault in the appliance.
The descaling process has
been interrupted.
The water is too hard.
Trouble shooting en
Insert water tank correctly.
Insert water tank correctly.
Fill the water tank with fresh tap water.
Do not fill with carbonated water.
Immerse the water filter (opening up)
in water until no more air bubbles
escape; insert the filter again.
~ "Inserting or replacing a water
filter" on page 41
Only operate the appliance at
220V-240V.
Operate the appliance at temperatures
> 5 °C.
Clean brewing unit if possible and
switch appliance off and back on
again.
Restart appliance.
Continue the descaling process.
~ "Service programme" on page 46
Insert water filter and activate accord-
ing to the instructions. ~ "Water
filter" on page 41
51