Dismounting, Return And Disposal; Dismounting - WIKA DI10 Betriebsanleitung

CAUTION!
If faults cannot be eliminated by means of the measures
listed above, the instrument must be shut down
immediately, and it must be ensured that pressure and/or
signal are no longer present, and it must be prevented from
being inadvertently put back into service.
In this case, contact the manufacturer.
If a return is needed, please follow the instructions given in chapter "9.2
Return".

9. Dismounting, return and disposal

WARNING!
Residual media in dismounted instruments can result in a
risk to persons, the environment and equipment. Take
sufficient precautionary measures.

9.1 Dismounting

To dismount the instrument, do the following steps:
Indicator for panel mounting:
1. Open the clamping screws and remove the fixing elements.
2. Remove the instrument and seal from panel cutout.
Indicator for wall mounting:
For dismounting the indicator open the four fastening screws of the enclosure
and remove it.
WIKA Betriebsanleitung Digitalanzeige Typ DI10 31