Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Menu level
Parameterization level
Setting the measuring range end value, END:
End
Set the end value from the smallest to the highest digit with
[▲] [▼] and confirm each digit with [P]. A minus sign can
only be parameterized on the highest value digit. After the last
digit, the display switches back to the menu level.
If SEnS was selected as the input option, you can only select
between nOCA and CAL. With nOCA, only the previously set
display value is taken over, and with CAL, the device takes
over both the display value and the analogue input value.
Setting the measuring range start/offset value, offs:
OFFS
Enter the start/offset value from the smallest to the highest
digit [▲] [▼] and confirm each digit with [P]. After the last
digit the display switches back to the menu level.
If SEnS was selected as the input option, you can only select
between nOCA and CAL. With nOCA, only the previously set
display value is taken over, and with CAL, the device takes
over both the display value and the analogue input value.
WIKA Betriebsanleitung Digitalanzeige Typ DI10
8
8
8
8
8
8
nOCA
8
CAL
nOCA
8
CAL
19
Werbung
Inhaltsverzeichnis
