Danfoss 088U0213 Benutzerinstruktion Seite 10

Instruction CF-RF Room Thermostat with InfraRed Floor Sensor
IMPORTANT!
As heat emission from the floor may vary slightly
depending on floor covering - and thereby cause
inaccurate temperature measurement - it may be
necessary to adjust the setting of max. and min.
floor surface temperatures accordingly.
! It is important always to follow recommendations
from the floor manufacturer regarding max. floor
surface temperature.
! It is recommended always to include mixing shunt
for floor heating circuits in order to ensure optimal
flow temperature. - In addition to minimised energy
consumption, correct setting of the flow tempera-
ture will eliminate the risk of excessive heat transfer
to the floor.
VI.UH.R1.80
9
Produced by Danfoss Floor Heating Hydronics 0.2006