Cameo CLF2FCPO Bedienungsanleitung Seite 10

STAND-ALONE MODE EDIT USER color (Edit User Color)
Starting from the main display, press on the right push button rotary encoder to move to the main menu. Rotate the left encoder (SELECT) to
select "Edit User Color" menu item (as indicated by selector arrow on left) and confirm by pressing the left encoder (ENTER). You can now
select one of the 8 color presets by rotating the left encoder and then confirm the selection by pressing on the left encoder (ENTER).
Now enter a custom name of up to 12 digits to be assigned to the preset (Edit User Color Name) by rotating the left encoder to a letter,
underscore or number for the first position of the preset name, confirming the selection by pressing on the left encoder. The second position
etc is chosen in the same way. Once the preset name is complete, press the center encoder (Save&Next) to move to the next step of editing.
If you press on "Save&Next" without selecting a letter, underscore or number for the first position, then the previous preset name is retained
and you move immediately to the next step of editing.
Now you can decide in which way you wish to create the color for the preset, i.e. one of the 4 methods "CCT", "HSI", "DIRECT" and "GEL",
as selected by rotating the left encoder (SELECT) and confirmed by pressing the left encoder (ENTER).
You should now set the desired color as described in the instructions for the respective stand-alone mode and then confirm by pressing on
the left encoder (ENTER/Save).
10