Replacing The Fuse; Technical Specifications - Futurelight EVO-10 Bedienungsanleitung

Replacing the fuse

If the lamp burns out, the fine-wire fuse of the device might fuse, too. Only replace the fuse by a fuse of
same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder on the rearpanel from the housing (anti-clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
DMX-control-channels:
DMX-512-connection:
Sound-control:
Dimensions (LxWxH):
Weight:
Maximum ambient temperature t
Maximum housing temperature t
Min.distance from flammable surfaces:
Min.distance to lighted object:
Fuse:
Accessory:
GE CSR575/2 SE 95V/575W GX-9,5 1000h
PHILIPS MSR575/2 95V/575W GX-9.5 1000h
SYLVANIA BA575/2 SE NHR 95V/575W GX-9,5
FUTURELIGHT CP-240 controller
FUTURELIGHT CP-256/32 controller 16bit
FUTURELIGHT CP-256/64 controller 16bit
FUTURELIGHT CP-512/64 controller 16bit
FUTURELIGHT CP-528 controller 16bit
Wizard-512 USB DMX-Software + Interface
Wizard-1024 USB DMX-Software + Interface
FUTURELIGHT DES-3 DMX-terminator 3-pin
Please note: Every information is subject to change without prior notice. 30.11.2005 ©
230 V AC, 50 Hz ~
800 W
10
3-pin XLR
via built-in microphone
460 x 380 x 395 mm
24.5 kg
: 45° C
a
(steady state): 85° C
B
0.5 m
0.5 m
T 10 A, 250 V
No. 89107000
No. 89107015
No. 89107020
No. 51834265
No. 51834286
No. 51834288
No. 51834295
No. 51834315
No. 51860102
No. 51860110
No. 51834001
54/104 51837570_V_1_0.DOC