Error Codes - cecotec BOLERO 10500 INVERTER A Bedienungsanleitung

ENGLISH
The washing machine fills up
during draining.

7. ERROR CODES

CODE PROBLEM
E1 The washing
machine takes
a long time to
fill up.
E2 The washing
machine takes
a long time to
drain the water.
E3 The door is not
closed properly.
E4 The water
overflows.
E5 Electric motor
failure.
E6 Heating element
failure.
E7 Temperature
sensor failure.
E8 PCB or
frequency
inverter board
failure.
E9 Communication
failure
(software).
B OL E RO D RE SS CO D E 10 5 0 0 I N V E RTE R A
74
B OL E RO D RE SS CO D E 10 5 0 0 I N V E RTE R STEEL A
Check if the height of the drain hose is less than 65 cm.
Check if the drain hose is submerged.
POSSIBLE SOLUTIONS
Check if the water inlet tap is open.
Check that the water pressure is not too low.
Check that the water inlet hose is not dirty or blocked.
Check that the drain pump is not blocked.
Check that there are no items such as clothes or dirt between
the door and the seal.
Check that the water outlet hose is not dirty or blocked.
Contact the Technical Support Service of Cecotec.
Contact the Technical Support Service of Cecotec.
Contact the Technical Support Service of Cecotec.
Contact the Technical Support Service of Cecotec.
Contact the Technical Support Service of Cecotec.