Memory Function; Storing Data; Recalling Data - Topcom BD-4601 Bedienungsanleitung

BD-4601 (BPM Arm 1500)
12

Memory function

12.1

Storing data

After each measurement, the systolic and diastolic pressure, heart rate with the time and date will be
automatically stored.
The monitor features a 3 zone memory capability. Each memory zone holds the last 40 measurements,
replacing the oldest data with new one.
12.2

Recalling data

10
• After the initial inflation of the cuff, the pressure will slowly
decrease and when a pulse is detected, the heart rate symbol
will start flashing.
• When the measurement is finished, the systolic pressure
diastolic pressure
be displayed for 1 minute.
• The monitor will automatically shut off after 1 minute if no button is
pressed.
• Press the mode button
memory zone.
• Press the memory button
– If there is no data in the selected memory zone, nothing
(except month, date, time and memory zone number) will
appear on the display.
– If there's 1 record, the first reading will be the only
measurement records, indicates with the average symbol
.
20
– If there are multiple records, the first reading will be the
average of the last 3 records, indicated with the average
symbol
• Press the memory button
measurement result.
• Press the memory button
stored.
• To stop reading the data, press the start/stop button
switch back to stand-by.
To erase all data from one memory zone:
• Press the mode button
memory zone.
• Press the memory button
result.
• Press the mode button
to erase all data from the selected memory zone.
, heart rate
13 14
repeatedly to select the desired
4
to enter memory mode.
6
.
20
again to see the last
6
repeatedly for prior records
6
repeatedly to select the desired
4
to see the last measurement
6
and set button
4
and WHO indicator
12
5
simultaneously
3
14
,
11
will
to