Changing The Grill Temperature; Display Of The Current Temperature; Switching Off; Safety Functions - Rommelsbacher CERAN CG 2308/TC Bedienungsanleitung

3. Changing the grill temperature

• To change the grill temperature during operating mode, press the "+" or "-" touch key once in
order to change over to the setting mode. (For safety reasons, this first touch does not result in
a change of the grill temperature.)
• Now, by touching the "+" or "-" key once again, the grill temperature can be changed in steps
of 10 °C.
• NOTE: If no further sensor is touched within 5 seconds, you will hear an acoustic signal and the
appliance switches back to operating mode.

4. Display of the current temperature

• NOTE: You may display the current temperature of the grill plate at any time in order to check
the heating up process and the temperature control. Temperatures of the grill surface, which
are < 40 °C are not detected and displayed as "40 °C"
• Press the "°C" touch key once to enter the display mode. The red LED "current temperature"lights
up and the actual temperature of the grill surface is displayed. The normal operating mode with
temperature
NOTE: If the appliance is in display mode, it is not possible to change the grill temperature.
• The display mode is automatically quit after 5 seconds, or by pressing the "°C" touch key again.

5. Switching off

• Touch the main switch. You will hear an acoustic signal and all displays go out. The control unit
is in waiting mode now and the "operation" LED above the main switch flashes.
• NOTE: With the main switch the control unit can be switched off any time during operation,
even if other key functions are active.
• As long as the grill plate has a temperature of > 60 °C after switching off, the warning "hot"
will be is displayed. If the appliance is disconnected from the power supply, the display goes
out completely.

Safety functions

The appliance features several safety functions, which are intended to protect you as user as well
as the appliance from unintended or dangerous operating situations.

Operating time limitation

The operating time limitation causes an automatic switch off in case there was no touch key
activation over a period of one hour. It works independent of the set temperature. Once the grill
has been switched off automatically, it can be switched on again and the maximum operating
time is re-activated.

Temperature monitoring

If the temperature sensor detects a low ambient temperature (< 10 °C), "lo" (=low) is displayed.
Normally, this indication goes out after several seconds in operating mode. If, however, the sensor
does not detect a change in temperature after a specified period, the sensor monitoring is
activated.

Sensor monitoring

If an inadmissible value (temperature ≤10 °C and ≥320 °C) is measured, the error code "E06" is
displayed. In this case unplug the appliance and wait a short time, then you can again put the grill
in operation. In case the "E06" error code still remains on the display, you have to contact your
technical service point.
24
regulation is still running in the background.