Lighting Unit - Franke FSN 908 BK A Bedienungsanleitung Und Installation

This filter cannot be washed or regenerated. It must be replaced when the C appears on the
display or at least once every 4 months. The filter saturation alarm has to be activated already
before.
Activation of the alarm signal
• In the recycling version hoods the filter saturation alarm must be activated during the instal-
lation or later.
• Switch off the hood and the lights.
• Press the D-key for about 5 seconds.
• 2 flash C-symbol lit - charcoal filter saturation alarm ACTIVATED.
• 1 flash C-symbol lit - charcoal filter saturation alarm DEACTIVATED.
CHANGING THE ACTIVATED CHARCOAL FILTER
Resetting the alarm signal
• Turn the Lights and the Suction Motor off.
• Press button G and hold it for at least 2 seconds.
Changing the Filter
• Pull the comfort panels to open them.
• Remove the grid by pulling it from the side.
• Remove the saturated Activated Charcoal Filters, as indicated (A).
• Fit the new Filters, as indicated (B).
• Replace the Grid.
• Close the comfort panel.
• For replacement contact technical support ("To purchase
contact technical support").
EN
Charcoal filter (recycling version)

Lighting unit

A
B
1
13