Safety Measures - Makita PF 4000 Originalbetriebsanleitung



Safety measures

Carefully read the operating instructions before assembling and starting.
The appliance must not be used by persons who are not thoroughly
acquainted with the instructions handbook (operating instructions).
Children and persons under the age of 16 cannot use the pump and must be
kept well away from the appliance when it is connected. The user is liable
towards third parties in the area where the appliance is in operation.
While the pump is operating persons must not be in the liquid to
be pumped. The pump may be connected only by means of a safety
switch for fault currents, with a rated opening current up to 30 mA and
a socket with an earth contact installed in conformity with the regulations.
Protection: at least 10 Amps.
CAUTION: Before checking, connect the pump and the system with no
voltage! Replacing the line connecting up with the mains requires using
special tools and therefore may be done only by authorised Makita
service centres.
For your safety
The supply voltage indicated on the pump's rating plate must
correspond to the available mains voltage. Before starting it is necessary
to make sure by having a check made by qualified personnel that there are
the necessary electrical protection measures.
• Earth connection.
• The pump must be used with a supply that a supply residual current device
(RCD) having a rated residual operating current not exceeding 30mA.
• Plug connections must be protected from water. If there is a risk of flooding,
plug connections must be placed somewhere safe.
• Definitely avoid pumping aggressive liquids and abrasive products.
8